The tool should detect your flash drive and show it as "Ready" or "Idle".
When the tool displays a green "Pass" or "Finished" message, the process is complete.
If you need help resolving a specific error or finding compatible firmware, please share the and Flash ID provided by ChipGenius , as well as the exact Error Code you are seeing during the flash process.
Write this down. You need the exact controller version. asolid usb mptool verified
Once the progress bar hits 100% and turns green:
: Download the exact version of the ASolid MPTool that supports your specific controller and flash memory ID.
To ensure that you're using a verified USB MPTool, follow these steps: The tool should detect your flash drive and
This usually means the NAND flash chip is physically damaged beyond a software fix.
Based on the findings, it is recommended that:
: In Windows settings, change the "Decimal symbol" from a comma ( , ) to a period ( . ). Write this down
Download a hardware diagnostic utility like or Flash Drive Information Extractor .
Choose Low-Level Format if the drive has severe bad sectors. Choose High-Level Format if you are simply fixing a minor partition table glitch.
Save the configurations and return to the primary dashboard. 3. Executing the Flash