Ericsson Ers 2460 Datasheet [exclusive]

Field observations and technical documentation highlight that the ERS 2460 is equipped with a . In simple terms, this means the radio has four separate receiver chains, allowing it to listen for signals from mobile devices from four different spatial paths simultaneously. The 4Rx feature significantly enhances uplink performance by improving signal-to-noise ratio and increasing data rates at the cell edge. This leads to a better user experience, especially in challenging indoor environments where signals are weaker.

Model: Ericsson ERS 2460 Product type: Fixed Ethernet switch (Layer 2/Layer 3 capable modular switch)

When searching, use the exact model name or "Ericsson Radio 2460" . Datasheets for this equipment are often listed under umbrella terms like "Ericsson Radio System" or "Triple-Band Low-Band RRU".

The is a ruggedized, carrier-grade Ethernet switch designed for extreme environments. Part of the Ericsson Portfolio 2400 family, it is engineered for industrial automation , smart cities , intelligent transportation systems (ITS) , and utility substations (IEC 61850). It bridges the gap between operational technology (OT) and information technology (IT) by offering high reliability, low latency, and advanced Layer 2 switching. ericsson ers 2460 datasheet

The is a dual-band remote radio unit (RRU) within the Ericsson Radio System portfolio. It is designed primarily for low-band coverage and capacity, specifically supporting frequencies such as 700MHz, 800MHz, and 900MHz. Key Technical Specifications

| Part Number | Description | |-------------|-------------| | ERS-2460-8T | 8x 10/100TX, unmanaged, rugged | | ERS-2460-6T2SFP | 6x 10/100TX + 2x Gig SFP, managed | | ERS-2460-PWR | Same as above with 802.3af PoE on ports 1-4 |

~16 kg to 18 kg (enabling rapid one-man installation safety compliance). This leads to a better user experience, especially

The true value of the ERS 2460 is best illustrated by its real-world use cases. Major carriers have already deployed this hardware in their live networks.

Supports multi-carrier aggregation across LTE and NR layers to amplify peak user data rates and improve cell-edge reliability. 6. Installation and Deployment Standards

Specific metrics for output power (typically ranging from 60W to 200W per band for low-band RRUs), exact dimensions, and weight are internal to Ericsson and vary based on the exact product revision. For precise engineering data, consulting a direct Ericsson datasheet is recommended. The is a ruggedized, carrier-grade Ethernet switch designed

: Up to 80W total (typically configured as 4 x 20W per band/port) with intelligent dynamic power sharing across carriers.

Ericsson ERS 2460: Technical Datasheet & Comprehensive Overview

| Parameter | Value | | :--- | :--- | | | 8.8 Gbps (8-port) / 17.6 Gbps (16-port) / 26.8 Gbps (24-port) | | Forwarding Rate | 6.5 Mpps (8-port) / 13 Mpps (16-port) / 19 Mpps (24-port) | | MAC Address Table | 8K entries | | Jumbo Frame Support | Up to 9,216 bytes | | VLAN Groups | 256 active VLANs (802.1Q) | | Buffer Memory | 4.1 Mbits shared memory |