Checkpoint Usb-c Console Driver Jun 2026

Open on Windows (right-click Start > Device Manager).

Installation & compatibility

The USB-C console port on most modern Check Point appliances, including the Quantum Spark (1500 series) and various Quantum Security Gateway models (3000 to 28000 series), uses a Silicon Labs bridge chip. Silicon Labs CP210x USB to UART Bridge VCP Driver Official Sources:

This typically points to a driver signing conflict or an incomplete installation. checkpoint usb-c console driver

Practical tips

Look for an entry labeled or "Silicon Labs CP210x USB to UART Bridge" followed by an assigned port number (e.g., COM3 ).

If you have installed many different network drivers or USB adapters over the years, Windows might assign the device a COM number that is already "in use" by a ghost device. Open on Windows (right-click Start > Device Manager)

How to Download the Correct Check Point USB-C Console Driver

For data centers, use a (e.g., OpenGear or Lantronix). Ensure the console server's OS has the CP210x driver. Then connect via SSH to the console server's port mapped to the Check Point appliance.

Most Check Point appliances utilize a USB-to-UART bridge, often manufactured by Silicon Labs (CP210x series) or similar vendors, to convert the USB connection into a serial console terminal. Which Appliances Require This Driver? Practical tips Look for an entry labeled or

: On appliances featuring both USB-C and RJ45 console ports, the USB-C port is given automatic priority by the driver. Compatibility and Deployment

Disconnect the session and verify your Baud Rate. If it was set to 9600, switch it to 115200, or vice versa. Ensure Flow Control is explicitly disabled. Driver Maintenance and Best Practices

Right-click on the architectural file appropriate for your system ( CP210xVCPInstaller_x64.exe for 64-bit systems) and select .

The driver then initializes the UART parameters: 115200 baud, 8N1, no flow control by default.