Click "Relay Device Info" and then "Activate" .
Drag the newly generated dependencies.sh file from the Sliver folder directly into the Terminal window. Press to start the installation.
Sliver requires custom system components like libusb , iproxy , and irecovery to speak with an iPhone in DFU mode. Launch your Terminal.
Check your USB cable and make sure the device is correctly detected by checkra1n .
On M1/M2/M3 Macs, ensure you have allowed reduced security settings in recovery mode for unsigned kernel extensions. appletech752 sliver 61 fix
Fully compatible with macOS High Sierra, Mojave, Catalina, and Big Sur. iOS 14 Untethered Bypass:
: Navigate to your specific device category (e.g., Ramdisk bypass, A6/A7 Bypass, or Passcode/Disabled bypass).
On newer macOS versions (Catalina, Big Sur, and Monterey), the system often blocks Sliver. Apple Tech 752 Quarantine Fix : Open Terminal and enter:
By following these steps, you should be able to resolve the most common bottlenecks associated with the Sliver 6.1 bypass tool. Click "Relay Device Info" and then "Activate"
You must use an Arduino Uno with a USB Host Shield flashed with the checkm8 exploit. Software-only methods do not work for A5 devices on Sliver 6.1.
: Open Terminal and type the following command to strip the quarantine attribute:
Ensure you are using a USB-A port. If your Mac only has USB-C ports, use a basic USB-C to USB-A adapter rather than a multi-port hub.
: Ensure you enter DFU mode immediately after a restore and before the on-device progress bar completes. This prevents the filesystem from rejecting the missing Setup.app . Sliver requires custom system components like libusb ,
Use SSH Ramdisk Tool (by mineek) instead of Sliver for the same purpose.
A specific feature for the iPhone 5s (iOS 10.0–10.3.3) that loads a verbose server ramdisk. This allows users to access the file system via SSH to fix iTunes sync issues and install apps.
: New support for A7 devices (like iPhone 5s) on iOS 10.x, allowing for iTunes sync and app installation.