Generally 110V to 440V AC (±10%), 50/60 Hz.
Typically 230V AC or 110V AC (model dependent, ±10% tolerance).
Official TDK documents confirm it has been replaced by newer product families.
The Epcos BR 5016 (now produced under the TDK brand) is a digital power factor controller. Its primary job is to monitor the reactive power in an electrical network and switch capacitor steps in or out to maintain a target power factor (usually close to 1.0). --- Epcos Power Factor Controller Br 5016 Manual Pdf
series) is a 16-step, 3-phase sensing controller designed to manage unbalanced three-phase loading conditions for improved energy efficiency. Akanksha Power And Infrastructure Ltd Core Technical Specifications 16-step control for conventional three-phase capacitors. Operating Voltage: 415 V AC (L-L) at 50/60 Hz. Measuring Current:
Up to 16 programmable relay outputs for capacitor branches.
Ensure the document revision matches your hardware version, as firmware features can vary between production years. Generally 110V to 440V AC (±10%), 50/60 Hz
: Must match the installed current transformer (e.g., 500/5).
Do you need assistance with the for remote monitoring?
The Epcos Power Factor Controller Br 5016 offers several benefits, including: The Epcos BR 5016 (now produced under the
: Supports up to 16 capacitor steps for complex industrial setups.
Used for measurement voltages, measurement currents, and auxiliary voltage connections.
The Epcos BR5016 is a micro-controller-driven power factor regulator designed for three-phase low-voltage systems. It measures the actual power factor (cos φ) and connects or disconnects capacitor steps to match a user-defined target. Key Technical Parameters
Critical Safety Note. The discharge time must be set according to the capacitor's discharge device (typically 60 seconds). Setting this too short can cause inrush current damage or fire.
What is the installed in your panel? Share public link