Bushnell 3-9x40eg Manual -

Unscrew the cap on top of the illumination dial. Insert a standard CR2032 3V lithium coin battery with the positive (+) side facing up. Replace the cap firmly.

To preserve battery life, always return the dial to the "0" or "Off" position when not in use. 3. Sighting-In (Zeroing) How To Sight In Your Rifle Scope

Source:

, where each click moves the point of impact 1/4 inch at 100 yards. To move the impact , rotate the elevation turret counterclockwise; to move it , rotate the windage turret counterclockwise. Illumination Control: bushnell 3-9x40eg manual

If using a bolt-action rifle, remove the bolt and look down the barrel to center a target at 25 yards. Without moving the rifle, look through the scope and adjust the windage and elevation turrets until the crosshairs rest on the exact same target center. Alternatively, use a laser bore sighter. Step 2: The First Shots

If the shot is low, turn the elevation dial "UP." If the shot is left, turn the windage dial "R" (Right).

It's best to start with bore sighting to get on paper. A Bushnell bore sighter is ideal, but you can remove the bolt and look through the gun barrel at a 100-yard target, then adjust the scope so its crosshairs match that point. Unscrew the cap on top of the illumination dial

The end you look through, usually featuring a focusing ring.

Turn the side windage turret in the direction of the arrow marked "R" (Right) .

The 3-9x40EG illuminates the reticle, which is beneficial for dusk or dawn hunting. To preserve battery life, always return the dial

Before mounting, adjust the fast-focus eyepiece so the reticle is crisp. Point the scope at a plain wall or the sky and turn the eyepiece until the crosshairs are sharp at first glance.

Turn the dial in the direction of the arrow marked "R" (Right) to shift your bullet strike to the right. Turn it the opposite way to move it left. Step 4: Final Confirmation

Adjusts the bullet's impact point vertically (Up/Down).