Create a dedicated pool:
Once wired, the system requires a structured startup sequence. Parameter Setup
Connect the ground wire directly to the main protective earth (PE) ground lug first.
. Each level unlocks progressively deeper configuration capabilities. Manual Input Calibration : A common manual task during installation is the Slide Valve Input Calibration
For panels with a functioning OS but needing a newer Gforce runtime or application:
: Run signal cables in wire ducts that do not contain AC control wiring .
Remember to subscribe to the official GEA G-Force mailing list for security announcements, as manual installations do not include automatic update notifications. Happy hosting!
The manual installation of a GEA G-Force control panel (often associated with GEA Omni™ systems for separators and compressors) involves precise mounting, wiring, and initial configuration. These panels are modular systems designed for high-performance separation and compression environments, requiring specific grounding and cable shielding to ensure signal integrity. 1. Hardware Mounting and Installation
: Use a dedicated 2-conductor or 3-conductor shielded twisted-pair cable for all oil temperature, suction pressure, and discharge pressure transmitters. Route these cables within separate low-voltage wire ducts.
: Press the manual programming switch on the physical LDS body once to mark the low threshold. Confirm and store this raw low value within the GForce interface parameter tables.
With sensors connected, you'll now bring the panel to life with safe and reliable power.
The following steps were performed to manually install the GEA, GForce, and Panel systems:
Gforce panels are designed for panel-mount (cutout) installation in a control cabinet.