V2000-c Rfid Access Control User Manual -

Connect the positive wire of the lock to NC , the negative wire of the lock to GND , and bridge COM to +12V . When power is lost, the lock opens.

Note: Verify label on your unit for exact terminal names and polarity.

The core function of the V2000-C is managing who gets in and who stays out. The manual outlines a simple, code-based programming method:

| Status | LED Color | Buzzer | | :--- | :--- | :--- | | Standby | Red (solid) | None | | Card read OK | Green (1 flash) | 1 short beep | | Access denied | Red (3 flashes) | 3 long beeps | | Programming mode | Orange/Flashing | Double beep | V2000-c Rfid Access Control User Manual

The V2000-C is a standalone RFID access control system designed for single-door security management. It combines an EM card reader with a keypad, allowing entry via card, PIN code, or a combination of both. This manual provides a complete guide to installation, programming, and operation.

The you are using (Magnetic Lock or Electric Strike)?

1,000 to 2,000 users (depending on the specific firmware version) Card Reading Distance: 3–8 cm Connect the positive wire of the lock to

| Mode | Command | Description | | :--- | :--- | :--- | | Card Only | *Master# → 3 → 1# | Requires valid card only | | Card + PIN | *Master# → 3 → 2# | Requires card and matching PIN | | PIN Only | *Master# → 3 → 3# | Enter PIN on keypad |

[Current Date] Prepared For: Security System Administrators / End Users Subject: Functional Overview, Installation Guidelines, and Operational Procedures

user wants a long article for the keyword "V2000-c Rfid Access Control User Manual". This suggests creating a comprehensive user manual for a specific RFID access control model. I need to cover product overview, specifications, installation, wiring, programming, card management, troubleshooting, etc. I should search for relevant information. I'll search for "V2000-c Rfid Access Control User Manual" and also for general access control manuals and programming instructions. search results for "V2000-c Rfid Access Control User Manual" show several potentially relevant pages. I need to open them to gather details. search results provide a good amount of information. I'll structure the article as a comprehensive user manual. I'll include sections for product overview, specifications, installation, wiring, initialization, programming, user management, door settings, troubleshooting, and maintenance. I'll cite the relevant sources. Now I'll write the article. article provides a comprehensive user manual for the V2000-C series standalone RFID access control system. It combines product specifications, installation instructions, wiring diagrams, and a complete programming guide to help you set up and manage the device effectively. While this guide synthesises information from various product sources, please note that the V2000-C is an older model, and some instructions may apply specifically to the V2000-C+ variant. The core function of the V2000-C is managing

and operates primarily with 125KHz EM standard cards or 4-digit PIN codes. Key Specifications 1,000 effective cards/users. Operating Voltage: 12VDC ± 10%. Access Modes: Card only, Card + PIN, or PIN only. Dimensions: 119mm x 76mm x 21mm. www.goldbridgesz.com Programming Instructions To perform any programming, you must first enter the Program Mode Enter Program Mode: + [Master Code] + (Default Master Code is typically Exit Program Mode: Command (while in Program Mode) Add a Card + [Read Card] or [Input Card Number] + Delete a Card + [Input Card Number/ID] + Change Master Code + [New Code] + + [New Code] + Set Door Open Time + [TT (00-99 seconds)] + Delete All Users (Use with caution!) Access Mode Settings You can configure how users gain entry: МікроАмпер Card OR Password (Default): Card AND Password: Password Only: Maintenance & Troubleshooting Factory Reset:

If you are looking for specific troubleshooting, I can help you with: for magnetic vs. electric strike locks.

Before mounting, ensure the power is disconnected. The rear of the unit features a color-coded wiring harness. Description Positive Power Supply Black Negative Power Supply Blue Normally Open (Electronic Lock) Purple Common Terminal Orange Normally Closed (Magnetic Lock) Yellow Exit Button Input Pink Doorbell Interface 3. Programming Basics

is a standalone, single-door security solution designed to manage building entry using RFID cards, digital keypads, or a combination of both . Capable of storing up to , this device features high-speed card recognition under 0.1 seconds, Wiegand 26 protocols, a rugged enclosure, and built-in anti-tamper security mechanisms.

Indoor or sheltered outdoor use (Operating temperature: -10°C to 55°C) 2. Wiring Diagram and Installation