Adjustment Program Epson 1390 Resetter Fixed Official

Turn your printer back on. The flashing red lights should now be gone, and the status monitor should read "Ready to Print." Critical Physical Maintenance Notice

Using the Epson 1390 Resetter often requires specific system conditions: How to Reset Epson SP 1390 Printer

The program uses a “virtual printer driver” that requires test mode:

Scroll down the list of options, select "Waste ink pad counter" , and click OK. Adjustment Program Epson 1390 Resetter

Many 1390 users install an "External Waste Ink Bottle" kit. This bypasses the internal sponges and collects the waste ink in an external jar, making the software reset much safer to perform repeatedly. Conclusion

Important Note: If you continue to print after resetting without cleaning the physical pads, waste ink may leak from the bottom of the printer. How to Use the Adjustment Program Epson 1390

Necessary if you replace the physical print head with a new one. ⚠️ Essential Safety Warning Turn your printer back on

: Bi-directional (Bi-D) adjustment, top margin adjustment, and head ID settings.

Scroll down the list, select "Waste ink pad counter," and click OK.

Extend the tube into a small plastic bottle or container securely fastened to your desk. This bypasses the internal sponges and collects the

I have structured it to be helpful for users, while including necessary (since resetting waste ink counters can lead to physical printer damage if not done correctly).

Turn off your printer and then turn it back on. The Adjustment Program Epson 1390 Resetter process is now complete.

This is a service tool (usually an .exe file) designed for technicians. It lets you:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.