Click the green button. The status changes from STOP to RUN . The Diagnostics Console will show CPU startup (STOP → STARTUP → RUN). Expect a cycle time of 5–15 ms depending on logic complexity.
Set independent PIN1, PIN2, PUK1, and PUK2 codes for each cloned profile to maintain individual security.
It allowed the customization of independent PIN1, PIN2, PUK1, and PUK2 codes for each emulated profile, effectively recreating a native SIM user experience. The Extension (EXT) Files:
: Enables manual division of EEPROM memory space to balance SMS storage and contacts across profiles. sim-emu 6.02 configurator v2.2
The SIM-EMU software suite originated in the early to mid-2000s alongside early generations of programmable smart cards. In modern telecommunications, networks have largely migrated to USIMs (Universal Subscriber Identity Modules) and highly secure cryptographic standards (e.g., Milenage algorithms), rendering legacy SIM-EMU configurations obsolete for standard modern network operations.
The SIM-EMU Configurator v2.2 is the dedicated interface for programming, calibrating, and managing the . This tool allows you to map hardware controls (cab desk), set train parameters (traction, braking, doors), and configure network protocols for driver training simulators.
Before making changes, click "Read" to ensure the software properly detects the loaded firmware on the card. Edit Data: Input the necessary IMSI, ICCID, and Ki values. Click the green button
Sim-emu is a software-based SIM emulator that allows users to simulate and interact with mobile networks, mimicking the behavior of a physical SIM card. This powerful tool enables developers to test and debug mobile applications, researchers to analyze network protocols, and enthusiasts to experiment with mobile technology.
Open the SIM-EMU 6.02 Configurator v2.2 on a compatible Windows environment.
: Hardware like a Phoenix/Smartmouse programmer is required to interface the PC software with the blank programmable card. Expect a cycle time of 5–15 ms depending
If you're ready to start your project, you can often find legacy versions of the software on community archives like Software Informer or specialized GSM blogs . Sim-Emu 6.02 configurator v2.2 - YahooM Blog
Check your parsing tool; verify if the Ki needs to be byte-swapped for your firmware version. Legacy Status and Modern Equivalents
| Feature | Description | |---------|-------------| | | Store up to 10 different operator profiles (IMSI + KI pairs) on a single card. | | Phonebook (ADN) & SMS configuration | Define the maximum number of contacts and SMS messages the card can hold. In SIM‑EMU 6.00, typical values were 254 ADN entries, 254 FDN entries, and 99 SMS messages, though the phone’s own limitations often reduced these numbers. | | FDN (Fixed Dialling Numbers) | Configure the Fixed Dialling Numbers list and define its size. | | PIN / PIN2 / PUK / PUK2 management | Set or modify the PIN and PUK codes for each profile. | | Custom service provider name (SPN) | Change the name displayed on the phone’s screen when the card is active. | | Separate SMS centre number per profile | Each position can have its own SMSC, which is not possible on a standard SIM. | | Configurable A3/A8 authentication counter | Enables or disables the authentication counter – useful for some older phones. | | Remote configuration via phone menu | Once the card is in the phone, a “SIM‑EMU Configurator” menu appears, allowing you to switch between profiles without a PC. |
: Historically used to flash the initial PIC/EEPROM hex codes. 3. Cryptographic Prerequisites
Users can store and switch between up to 10 distinct mobile numbers from different operators simultaneously on one card.