Press and hold the until the Power light flashes once . Release the button immediately. Press the Network button once more.
If you have followed all these reset methods and your printer still displays errors or fails to print, the issue may be hardware-related, such as a burned-out printhead or a faulty logic board, requiring professional repair.
Go to the official WIC Reset website and download the WIC Reset Utility for Windows. canon g3400 reset
If the first attempt is unsuccessful, unplug the printer for 10-15 seconds and carefully try again.
The printer will print a test page (usually a D=000.0 report) to confirm the counter is now zero. Turn the printer off and back on to exit Service Mode. Press and hold the until the Power light flashes once
Turn the printer off, wait 10 seconds, and turn it back on normally. Method 3: Factory Reset via Printer Buttons
Disclaimer: Modifying your printer using third-party service tools may void your warranty. This guide is for informational purposes. Always wear gloves when dealing with waste ink. If you have followed all these reset methods
The G3400 uses an optical sensor to detect ink levels in the external tanks. Sometimes, after refilling, the printer remains stuck on "Low Ink" or "Ink Empty." In this case, you need to reset the ink level detection.
Check for physical paper jams or unseated print heads, as these physical roadblocks can prevent a software reset from completing. To help resolve your issue quickly, tell me:
the "Set" button. The printer will click and print a page containing zeros ( D=000.0 ) to confirm the counter is cleared.