), dry chemical powder, foam, or water fog. Do not use a direct, high-volume water jet as it may scatter the fire.
To minimize the risks outlined in the MSDS, operators must wear appropriate personal protective equipment during handling, mixing, and application: Recommended PPE Chemical splash goggles or safety glasses with side shields
The MSDS warns of H336 (drowsiness/dizziness) due to solvent accumulation. Therefore:
Prolonged or repeated contact may cause mild skin irritation.
Wash affected areas thoroughly with soap and water. Do not use harsh solvents or thinners to remove the product from skin. Remove contaminated clothing. nitocote pe135 msds
It is not typically regarded as dangerous to the environment, but large spills should be prevented from entering water systems.
Low toxicity, but swallowing may cause gastrointestinal irritation, nausea, and vomiting. 2. Environmental Hazards
If the dried film burns in a surrounding fire, use water spray, carbon dioxide ( CO2cap C cap O sub 2 ), foam, or dry chemical powder.
: Exhibits excellent resistance to chloride and sulfate ions, as well as general chemical and UV exposure. Physical Properties ), dry chemical powder, foam, or water fog
: Ensure adequate natural or mechanical ventilation. Use an approved particulate/organic vapor respirator if spraying the material in confined or poorly ventilated rooms. 6. Technical Specifications and Physical Properties
: While non-hazardous in standard use, concentrated vapors should be avoided. Some individuals may be sensitive to resins, leading to potential skin irritation or allergic reactions. Section 4 & 6: First Aid & Accidental Release Skin Contact
This comprehensive guide breaks down the essential safety data, hazard identifications, protective measures, and application protocols for Nitocote PE135. 1. Product Identification and Composition
Fully dried/cured Nitocote PE135 is inert and can generally be disposed of as standard construction waste. Therefore: Prolonged or repeated contact may cause mild
Ensure adequate natural or mechanical ventilation during application.
Do not induce vomiting unless directed to do so by medical personnel. Rinse the mouth thoroughly with water and give plenty of water to drink. Seek medical attention if discomfort continues. 5. Fire-Fighting Measures
Nitocote PE135 Other means of identification: High-build, solvent-free epoxy coating (paving grade) Recommended use: Protective coating for concrete and steel in secondary containment, bund areas, and industrial flooring. Manufacturer: Sika/Fosroc (check local subsidiary).
To ensure safety on site, adhere to the following handling and storage requirements for Nitocote PE135: