Motorola Gm360 | Programming Software ~upd~

Motorola uses to configure its Professional Radio Series, which includes the GM360.

The GM360 is highly regarded for its advanced signaling capabilities. In the signaling menu, you can set up:

Windows 10/11 blocks unsigned drivers (which the FTDI cable or Motorola driver may use).

belongs to the Waris series. You’ll need the , which is the same software used for other popular models like the GP340 and GP380. motorola gm360 programming software

If you are encountering issues setting up your system, please share: The you see on your screen

Assuming you have the correct CPS (vR05.16) and a working XP laptop:

Set the (usually 12.5 kHz for narrow-band or 25 kHz for legacy wide-band operations). Motorola uses to configure its Professional Radio Series,

Enter your authorized frequencies in the and Tx Frequency fields.

Use the latest available version of the Professional Series CPS for better compatibility.

If you have recently acquired a Motorola GM360 (or its close relative, the GM380) for your vehicle, site comms, or amateur radio setup, you’ve likely hit the first major roadblock: belongs to the Waris series

Two-Way Radio Tech is a team of licensed amateur radio operators and commercial radio technicians with over 20 years of experience in Motorola, Kenwood, and Icom programming.

: This series was primarily designed for the European market. Using a non-European software version can cause regional mismatch errors.

Define the specific frequencies, bandwidth (12.5/25 kHz), and power levels for each channel.

Customize the P1–P4 buttons for shortcuts like "Monitor," "Scan," or "High/Low Power."

Are you setting up or utilizing 5-tone signaling features?