Ezviz Downgrade Firmware 2021 Jun 2026

While continuing to hold the reset button, plug the power cable back into the camera.

If your camera is mounted high up and hard to access physically, you can try downgrading over your local network using the advanced developer options in EZVIZ Studio. Step 1: Enable the Advanced Menu By default, EZVIZ Studio hides configuration settings. Install and open EZVIZ Studio on your Windows PC.

The username is typically admin . The password is the unique 6-character Verification Code printed on the physical sticker of your Ezviz camera. Navigate to the Upgrade or Maintenance tab.

Once complete, the camera will reboot automatically and play its standard startup chime or display a solid/slowly flashing blue light. Method 2: The Hikvision TFTP Server Method (Advanced) ezviz downgrade firmware

Insert the prepared MicroSD card into the camera’s card slot. Press and hold the physical button on the camera.

Before downgrading your EZVIZ device's firmware, make sure to:

By following this guide, you should be able to successfully downgrade your EZVIZ firmware and resolve any issues you're experiencing with your device. While continuing to hold the reset button, plug

Keep holding the reset button for 15 to 20 seconds, then release it.

Place your digicap.dav firmware file into the same folder as the Hikvision TFTP software.

Firmware updates can sometimes introduce glitches, such as broken motion detection zones, delayed push notifications, or errors when reading the MicroSD card. Install and open EZVIZ Studio on your Windows PC

The Ultimate Guide to EZVIZ Firmware Downgrades: How to Roll Back Safely

This long-form guide will walk you through everything you need to know: the reasons you might want to downgrade, the official policy, the general methods for attempting it, and the crucial precautions you must take to avoid permanently damaging your device.

Ensure your PC and your EZVIZ camera are connected to the exact same Wi-Fi network or router.