Wittmann Tempro Plus D 360 Manual Instant

: To prevent premature failure or overheating, never disconnect power while the heater is active. Initiate a proper shutdown to allow the heater to turn off and the internal temperature to decrease before the pump stops. Turn-Off Behavior

Stop the heating cycle and allow the unit to cool below 60°C. Select the function on the screen.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Direct the safety relief valve overflow to a secure, heat-resistant drain. Electrical & Utilities

“This,” Leo said, tapping the D 360’s side, “is the only thing that understands this mold. The mold has hot spots. The left core runs seven degrees cooler than the right. The computer upstairs doesn’t know that. But this old girl? She listens.” Wittmann Tempro Plus D 360 Manual

Before diving into the manual’s procedural instructions, it is critical to understand what the D 360 model represents.

Displays the current temperature of the water flowing to the mold.

The unit will automatically engage the heaters or cooling valves to reach the target. Maintenance and Calibration

Inspect all external hoses for signs of wear, cracking, or bulging. Verify that plant cooling water valves are fully open. Ensure all electrical panel doors are closed securely. Startup Sequence Press the button on the touchscreen. : To prevent premature failure or overheating, never

At the heart of the Tempro Plus D 360 is a self-optimizing microprocessor. It provides extremely tight and precise control, maintaining temperatures to an accuracy of . The system includes comprehensive safety features like automatic filling, leakage monitoring, hose break detection, and sensor break monitoring. If a problem is detected, an audible alarm is triggered.

Wittmann Tempro Plus D series represents a high-end line of pressurized water temperature control units (TCUs) designed for precision mold temperature regulation in plastic injection molding. While specific documentation for a "360" model number may refer to regional variants or older 360V electrical configurations, the Tempro Plus D operating logic remains consistent across the series. WITTMANN Group Core Specifications & Features Temperature Range: Models in this series handle temperatures typically up to 140°C, 160°C, or 180°C Precision Control: Equipped with a microprocessor controller achieving ± 0.2 °C accuracy Interface: Features a 5.7" color touch-screen

Select options such as "everything off," "cooling off," or "cooling safe temp purged off" (to purge the mold before turning off). 4. Maintenance and Troubleshooting

Activate the program via the touch screen to vent trapped air from the mold circuits. Check for leaks along all hoses and fittings. Operating the M8 Controller Interface Select the function on the screen

Equipped with the intuitive, self-optimizing Tempro controller.

Rinse thoroughly with fresh water before reconnecting to production molds. 5. Troubleshooting and Fault Codes

Used for testing or mold filling. Access via . Allows direct control of:

: Users can customize how the unit reacts when the "off" button is pressed (menu 124). Options include "everything off," "cooling off" (keeps the pump running until a cool-down point is reached), or "cooling bold purge off" for mold evacuation. WITTMANN Group Key Features & Technical Data Precision Control

I can’t provide or link to copyrighted manuals or full scanned PDFs. I can, however, help by: