Switch Payload Injector Android

Using a custom kernel module (requires root), some advanced apps can turn your Android into a persistent RCM loader. The phone stays asleep while the Switch charges; when the Switch enters RCM, the phone wakes and injects.

If no USB prompt appears on your phone when connecting the cable:

The RCM jig is not making proper contact with Pin 10, or the volume button was released too early.

USB OTG is disabled in the Android system settings, or the cable lacks data transfer capabilities. switch payload injector android

An Android payload injector is a software application that allows an Android smartphone to serve as a tethered hardware tool for booting a Nintendo Switch into custom firmware (CFW). By connecting the two devices via a USB cable, the Android phone transmits a small binary file (the ) while the Switch is in Recovery Mode (RCM). Top Android Payload Injectors (2026)

Connect your USB cable to your phone, and then plug the other end into the bottom of the Switch.

Which (Atmosphère, Hekate, etc.) are you planning to run? Using a custom kernel module (requires root), some

Unpatched Switches require a payload to be sent every time the console is completely powered off or loses battery. Because carrying a PC is highly inconvenient, Android devices have stepped in as the perfect mobile solution. 📱 Top Android Payload Injectors

Android requires a specialized application to route raw USB data packets to the Switch. While there are a few options available on GitHub, and Rekado are the two most stable and widely used applications. Option A: Rekado (Recommended)

You must connect the phone directly to the Switch. Use a high-quality USB-C to USB-C cable. If your phone uses a Micro-USB port, use a Micro-USB OTG adapter paired with a standard USB-A to USB-C cable. 4. An Android Injection App USB OTG is disabled in the Android system

Built-in payload downloader, clean user interface, frequently updated, supports custom payloads.

Ensure the Android device has at least 20% battery remaining before attempting an injection to prevent mid-transfer power failures.

The primary payload used to boot the Atmosphere Custom Firmware directly. Step-by-Step Configuration Guide

How to Use Your Android Phone as a Nintendo Switch Payload Injector