Tgc Bc-90-1h Manual

of space around the sides and back for proper ventilation, as it is a freestanding unit.

Press the Start button. The digital display will flash a battery voltage check. If the voltage is too low (under 2V for 12V systems), the charger may not start, per the manual’s “dead battery” protocol.

Disclaimer: This article is for informational purposes and summarizes common features found in standard charger manuals. Always refer to the specific printed manual included with your TGC BC-90-1H unit.

Once lit, hold the knob for 3-5 seconds to engage the safety sensor, then adjust the flame height as needed. Turning Off: Turn the knob clockwise to the "Off" position. 5. Cleaning and Maintenance To keep your TGC BC-90-1H in top condition: tgc bc-90-1h manual

Aesthetically, the BC-90-1H is a wall-mounted unit that matches the simple, functional design of TGC appliances. It's powered by a low-voltage cable connected directly to the water heater, which keeps the installation clean and eliminates the need for frequent battery changes, ensuring constant reliability.

Press the to increase heat or the Down arrow to decrease heat. Active Safety Adjustments

If you are experiencing a specific issue like an or lack of hot water , let me know: What number is flashing on the screen? Is the gas supply currently turned on at the meter? Did this start after a power outage or water maintenance ? of space around the sides and back for

If you are starting up the unit for the first time or after a seasonal shutoff, use the following commissioning steps:

Page 18 explains how to use the BC-90-1H as a DC power supply. By holding the Mode and Start buttons simultaneously for 8 seconds, the charger enters a constant voltage supply mode. This is excellent for testing car stereos, lights, or DC motors without a battery.

This article serves as a comprehensive resource. Whether you have lost your original physical copy, need a quick programming reference, or are troubleshooting an error code, this guide will walk through every section of the standard TGC BC-90-1H manual. If the voltage is too low (under 2V

is lit, temperature adjustments can be made from that specific remote. : Priority cannot be switched if the indicator is flashing. High-Temperature Warning

Triple burner design (Left, Center, Right).

: A built-in flame rod continuously monitors burner health. If the flame blows out unexpectedly, the controller shuts off gas delivery instantly.

The TGC BC-90-1H is a high-performance built-in gas hob known for its durability and efficient heat distribution. Designed for modern kitchens, it features a sleek aesthetic paired with robust safety mechanisms, such as flame failure devices. 2. Technical Specifications