Chevron Digital Timer Ew-32 User Manual [repack]

The outlet remains continuously powered. Saved programs are ignored.

Press "+" again until the screen shows "1 OFF." Repeat the same day and time selection steps.

This security feature randomizes your programmed times by 10 to 30 minutes. It makes an empty home look occupied by turning lamps on and off at slightly unpredictable intervals.

Press the button to select the specific days you want this program to run. Keep tapping WEEK to cycle through individual days or multi-day blocks, such as: Every day individually (e.g., just Monday) All 7 days of the week ( MO TU WE TH FR SA SU ) Weekdays only ( MO TU WE TH FR ) Weekends only ( SA SU )

Hold the button for at least 2 seconds until "SET" and the "HOUR" begin flashing. chevron digital timer ew-32 user manual

Press and MIN to set the exact time you want the appliance to turn off. Step 5: Save and Exit

Do not release it until instructed.

(setting clock + one ON/OFF event). No – for advanced use (multiple programs, random mode, troubleshooting).

Use and SET to choose specific days (e.g., just weekdays or the full week) and the exact time you want the device to turn ON . The outlet remains continuously powered

If the timer is currently supposed to be on, cycle the mode to , then switch to AUTO (the screen will read AUTO ON ). 6. Advanced Features: Random and Daylight Saving Time Random Security Mode (VACATION Mode)

15A Resitive, 15A General Purpose, 1250W Tungsten, 1/2HP

: Press the RND button to turn lights on/off randomly (usually within a 30-minute window of your set times) to mimic someone being home.

Press again to save the entry and advance to the turn-off phase. The screen will display 1 OFF . This security feature randomizes your programmed times by

Repeat the steps for programs 2, 3, 4, etc., if you need multiple schedules. Once finished, press the button to save your settings and return to the main clock display. Deleting or Restoring a Program

This guide is compiled from publicly available information and user experiences. It is intended for general informational purposes only. The manufacturer's original user manual, if available, should always be considered the primary source of information. Always exercise caution and follow electrical safety guidelines when using any electronic device. For safety concerns or specific technical questions, please consult a qualified electrician.

| Problem | Likely Solution | |---------|------------------| | Display blank | Press RST or check outlet power. | | Timer not switching | Ensure mode is , not ON/OFF. | | Time wrong after power cut | Internal battery dead – reset clock. | | Device turns off too early | Check program OFF time (AM/PM). | | Programs lost | Press RST and re-enter all programs. |

Repeat steps 5.1 and 5.2 to add additional ON/OFF cycles (Program 2, Program 3, etc.).

Press the button again. The screen will switch to display 1 OFF . Repeat Step 2 and Step 3 to set the exact days and time you want the device to shut down.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.