There are two ways to save:
Section B — Short Answer (28 marks; 4 marks each) Provide concise answers.
Which export is most commonly used to send 3D relief geometry to a CAM controller that accepts mesh? A. .ART B. .DXF C. .STL D. .PDF
Define the (Width and Height) to match your physical raw material. artcam pro 9.1 tutorial
Before diving into design, you must familiarize yourself with the workspace layout to navigate efficiently.
Section B sample points:
Before calculating toolpaths, click in the toolpaths panel. Input your physical board thickness. There are two ways to save: Section B
The core of ArtCAM Pro 9.1 is turning 2D shapes into 3D "reliefs." Shape Editor (F12) : Select a vector and press
ArtCAM Pro 9.1 is no longer updated, but its intuitive “vectors → relief → toolpaths” workflow remains one of the fastest ways to go from 2D drawing to CNC-ready 3D carving. Mastering these steps gives you a foundation that applies even to modern CAD/CAM software like Fusion 360 or VCarve Pro.
Set the or Height : For round profiles, a higher angle creates a steeper dome. For flat profiles, type the exact thickness in the Start Height field. Select the Combine Mode : Add : Sits the new shape on top of existing reliefs. Additional benefits include: Before drawing
Additional benefits include:
Before drawing, you must configure your model area to match your physical CNC machine and material.
If you want, I can:
Click to generate the .tap , .nc , or .gcode file. Load this file into your machine controller software to begin carving.
Raw geometric shapes often require manual refinement to look organic.