on the numeric keypad and hit the [PLU] key to retrieve the weight-based price. 3. Precision Labeling: Manual vs. Pre-pack While the scale has an automatic pre-pack mode
to enhance efficiency, accuracy, and customer satisfaction in any retail environment.
Select the assigned barcode type (typically EAN-13 or UPC-A) and configure the prefix pattern so the front-end scanners recognize the item.
Manual upkeep of the printer and scale platter is vital for maintaining hygiene compliance and preventing printer jams. 1. Loading Linerless Labels digi sm5300b manual work
Wait for the weight stable indicator (usually a small circle or lock icon) to illuminate. Press the key to output the label. Manual Price Override (Non-Preset Items)
Manual operation is necessary when handling non-programmed items or when an operator needs to override standard preset options. Standard Weighing and Printing (PLU Mode)
If using , guide the paper directly through the cutter mouth assembly. on the numeric keypad and hit the [PLU]
To manually change prices, create new PLUs, or adjust label formats directly on the device, you must transition from Sales Mode to Manager Mode. Navigating to Manager Mode Ensure the scale screen is on the default sales layout.
If you know the tray weighs exactly 15 grams, clear the scale platter.
The backend configuration mode used to manually input Price Look-Up (PLU) data, change prices, and adjust label formats. Pre-pack While the scale has an automatic pre-pack
| Problem | Likely Cause | Manual Fix | |--------|--------------|-------------| | Current reading shows negative when charging | Shunt sense wires reversed | Swap S+ and S- wires physically | | SOC jumps from 80% to 100% instantly | Charged voltage (P-04) set too low | Increase by 0.2V and repeat full charge | | SOC never reaches 100% | Tail current (P-05) too low | Increase to 5% or 8% for old batteries | | Display dim or blank | Aux power missing or low | Measure AUX input – must be 12-24V DC | | Erratic current readings | Loose shunt terminal bolts | Power off and torque bolts to spec (10 Nm) |
: Look at the sequence of existing items, identify an open number, enter it using the keypad, and confirm to create a new item.
For entering specific product codes manually.
Slide a new roll of thermal labels onto the spindle, ensuring the labels feed from the of the roll (thermal side facing upward toward the print head).