Gordak 952 User Manual Updated -

A heavy, grinding sound emerged from the machine's housing. It wasn't a motor starting; it was vocal cords clearing a throat of metal shavings.

Combines a hot air rework station and a soldering iron, saving valuable workbench space.

Periodically clean the soldering tip and ensure the hot air vents are free of dust.

In the original 1978 manual, the pressure gauge was listed as "Analog, 0-500 PSI." In the updated manual, it was labeled: gordak 952 user manual updated

Check the internal wiring connections in the handle or replace the heating element assembly. Broken iron element or loose plug.

To ensure you have the most accurate and up-to-date information for your specific station, here are the best places to download the manual:

Wait for the LED indicator light to flash rhythmically, indicating the tip has reached stable temperature. A heavy, grinding sound emerged from the machine's housing

Have you noticed any differences in newer Gordak 952 units compared to the older models? Let us know in the comments below!

Always clean and tin the tip with fresh solder before and after every use to prevent oxidation. Temperature Calibration Adjustment

Set the soldering iron temperature using the provided knob. Periodically clean the soldering tip and ensure the

The diaphragm air pump inside the chassis is suspended on rubber mounts to reduce vibration. To prevent damage during shipping, a red or silver retaining screw is installed on the bottom center of the outer casing. Flip the station upside down on a soft cloth. Locate the large screw marked with a warning label.

If you work in electronics repair, specifically with GSM devices or PCB rework, you know the name . The Gordak 952 is a staple in many workshops—a reliable, no-nonsense hot air rework station. But if you’ve recently tried to troubleshoot a temperature issue or calibrate your unit, you might have noticed something different: the documentation has changed.

When you finish working, turn off the Air Power Switch and place the wand in the holder. The pump will continue running to push cool air through the element. It will automatically shut off once the internal temperature drops below a safe threshold (approx. 100°C). Do not pull the main wall plug while the cooling cycle is running. Soldering Iron Operation

His workshop finally felt safe. No more burnt-out elements or humming transformers in the middle of the night.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.