Smartpack2 Touch User: Manual

The controller categorizes events into Major Alarms, Minor Alarms, and Warnings. Resolving Active Alarms Tap the flashing at the top of the screen.

The Smartpack2 evaluates analog and digital readings against user-defined thresholds to trigger visual, audible, and dry-contact relay alerts. Default Alarm Classifications

The most critical function of the is teaching you how to set the battery profile. Using the wrong profile kills batteries.

Proper configuration prevents equipment damage and optimizes system efficiency. 1. Network and IP Settings smartpack2 touch user manual

The primary interface for local configuration.

The Eltek Smartpack2 Touch is a high-resolution master controller designed for local monitoring and management of DC power systems. It features a touch screen for interface navigation, Ethernet and USB connectivity, and supports remote monitoring via SNMP or Web browser. For comprehensive technical details, download the User's Guide - Smartpack2 Touch Controller . Modular HE with Smartpack2 Touch - Kitsap 911

View live voltage, load current, and battery capacity. Alarms: Review active alarms and historical event logs. The controller categorizes events into Major Alarms, Minor

Keep your controller updated to utilize the latest features and security patches.

To prevent thermal runaway and ensure accurate State of Charge (SoC) calculations, enter the exact specifications of your battery bank: Navigate to .

Tap the screen firmly. Check the controller's seating in the shelf and verify input DC supply voltage. Default Alarm Classifications The most critical function of

Select and switch from DHCP to Static (recommended for infrastructure equipment). Input the assigned IP Address , Subnet Mask , and Gateway .

Place the firmware file in the root directory of a USB stick. Insert the USB drive into the Touch module. Access .

Supports automated boost charging and testing.

To restore, insert the flash drive containing the configuration file, navigate to , select the target file, and confirm execution. Upgrading Controller Firmware