SSH (recommended) or Telnet/Serial Craft launch.
The DCN is the management network that allows operations teams to connect to and manage MINI-LINK nodes remotely. CLI commands are used for:
copy running-config startup-config # Saves the current configuration to non-volatile memory show configuration database # Views stored configuration files Use code with caution. Software Updates and File Transfer
| Command | Description | |---------|-------------| | show radio link | Overall link status (RSSI, Tx/Rx power, modulation) | | show radio interface <id> | Detailed radio interface parameters | | show radio performance | BER, MSE, errors, counters | | show radio adaptive-modulation | Adaptive modulation status & current profile | | show radio atpc | Automatic Transmit Power Control status | | show radio alarms | Active radio alarms (LOS, LOF, high BER) | | radio loopback set <local/remote> | Set radio loopback for testing | | radio loopback clear | Remove loopback |
show sdh performance 1
Run a configuration export command before and immediately after any maintenance window. If you need help with a specific task, please let me know:
: Displays the configuration that will load on the next reboot.
Modern configurations run in volatile memory until explicitly saved to flash storage. write memory copy running-config startup-config Use code with caution.
interface ethernet 1 service-policy input backhaul ericsson mini link cli commands
Need to re-IP the node? Enter configuration mode first.
This guide provides a comprehensive reference for network engineers to configure, monitor, and troubleshoot Ericsson MINI-LINK nodes via the CLI. 1. Accessing the Ericsson MINI-LINK CLI
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
MINI-LINK nodes handle both traditional TDM traffic and modern Ethernet/IP packet traffic. IP and Routing Configuration SSH (recommended) or Telnet/Serial Craft launch
show modem
: Manually forces an Ethernet port to a specific speed (e.g., 1000Mbps).
cliunlock : A specific Ericsson command used to reveal "hidden" or advanced debugging commands. 2. Essential CLI Command Categories