- Books
- Children’s Books
- English Medium
- Cambridge A Level (Course Book)
- Cambridge A Level Redspot
- Cambridge A Level Year Wise Question Paper
- Cambridge O Level (Course Book)
- Cambridge O Level Redspot
- Cambridge O Level Year Wise Question Paper
- CGP Revision Guide
- Class 1
- Class 2
- Class 3
- Class 4
- Class 5
- Class 6
- Class 7
- Class 8
- Edexcel A Level (Student Book)
- Edexcel A Level Unique Chapterwise Question Paper
- Edexcel A Level Year Wise Question Paper
- Edexcel O Level (Student Book)
- Edexcel O Level Unique Chapterwise Question Paper
- Edexcel O Level Year Wise Question Paper
- Junior Solution
- KG – 1
- KG – 2
- Lab Book
- Mark Scheme (Cambridge A Level)
- Mark Scheme (Cambridge O Level)
- Mark Scheme (Edexcel A Level)
- Mark Scheme (Edexcel O Level)
- Nursery
- Play Group
- Solution
- Language Testing
- Olympiad Books
- Stationery
Achi Ir6500 Software !free! ⚡
Set the (typically 9600 for the PC410 controller).
: Features temperature stabilization thresholds to ensure the board is evenly heated before the top reflow begins. ⚙️ Connectivity & Compatibility The software connects to the rework station via a USB interface located on the side or back of the unit. Software Options Original ACHI Software : The standard utility provided by the manufacturer. Rework Pro
Requires manual configuration of the COM ports and registry values to display accurately, and lacks the customized ACHI branding. 3. Step-by-Step Installation & Driver Guide
Before opening the rework software, install the . Once installed, check your Windows Device Manager to see which COM Port (e.g., COM3) has been assigned to the station. 2. Configure the Port Settings
This indicates hardware interference rather than a software bug. Ensure your K-type thermocouple wires are not touching any metal parts of the chassis, as this creates a ground loop that disrupts the data signal being sent to the software. Software Crashes on Startup achi ir6500 software
Complete Guide to ACHI IR6500 Software: Installation, Profiles, and Modern Alternatives ACHI IR6500 BGA Rework Station Go to product viewer dialog for this item.
: Includes emergency shutdown triggers if temperatures fall below safe thresholds during a run. Smart Preheating
An effective profile is broken down into distinct zones within the software: Target Temp (Leaded) Target Temp (Lead-Free) 100°C–120°C 130°C–150°C 90–120 sec Evaporates PCB moisture safely. Soaking 140°C–150°C 170°C–190°C 60–90 sec Activates the flux uniformly. Reflow 185°C–200°C 220°C–235°C 30–50 sec Melts the solder balls completely. Cooling Gradual descent Gradual descent Hardens solder without thermal shock.
The software acts as the interface for the station's built-in . To use the software effectively: #95 | IR6500 Rework Station Software (PC410 Controller) Set the (typically 9600 for the PC410 controller)
To ensure your ACHI IR6500 software remains stable, follow these professional tips:
The original software suite for older firmware revisions. It is lightweight but lacks modern reporting templates.
The ACHI IR6500 is a legendary dark infrared BGA rework station, favored by DIY enthusiasts and professional repair technicians alike. While the hardware is robust, the is the "brain" that determines the success of your reflow or reballing process.
Drafts from open windows or air conditioning units can warp your software readings. Ensure your rework station operates in a stable, well-ventilated environment. Software Options Original ACHI Software : The standard
Unlike many competitors, most ACHI IR6500 units use a USB hardware dongle (looks like a small flash drive) for licensing. Do not lose this dongle. If you have a software key, check the back of the camera’s user manual.
Setting up and mastering this software is the difference between a perfect repair and a scorched motherboard. 🛠️ Essential Software Components
While profiles vary by board thickness and humidity, a standard starting point for lead-free BGA rework includes: : 120°C for ~3 minutes to reduce thermal shock. Ramp-up : 2°C/sec until reaching the soak temperature. Soak : 180°C for 60 seconds to activate flux.
