Upgrading your head unit can be completed using either Over-The-Air (OTA) or manual local installation. Method A: Over-The-Air (OTA) Update
TS10 hardware platforms rely on specific system architectures. The TS10.1.2 firmware bridges the underlying hardware with the Android OS layer. Specification Details
Insert the USB drive into one of the USB ports of the head unit.
If the unit restarts to a persistent black screen but the button backlights are on, the system configuration file may not have matched your screen resolution. To fix this, you must re-flash the system using a firmware build containing the specific configuration file for your panel resolution (e.g., 1024x600, 1280x720, or 2K resolutions). Steering Wheel Controls Stopped Working ts10.1.2 firmware
If the device keeps rebooting into the update screen, remove the USB drive immediately after the first successful reboot.
Connect the prepared USB flash drive to the primary USB port of the head unit (usually labeled USB 1 or OTG).
Turn on your vehicle's ignition and allow the head unit to boot completely into the main launcher. Upgrading your head unit can be completed using
Navigate to Settings > System > Reset Options and perform a to clear old system caches and prevent file conflicts. Troubleshooting Common Installation Errors Issue Encountered Root Cause Definitive Solution "No update file found" Incorrect USB file path or wrong drive format.
Before downloading any file, verify your build. Navigate to:
: Resolution of common issues like audio clipping, unresponsive touch areas, or random system reboots. Security Patches Specification Details Insert the USB drive into one
After the main interface loads, safely remove the USB flash drive.
Find the small "RST" (Reset) button on the front panel and press it with a pin, or turn your car off and back on.