Erickhill Rt-100 User Manual Upd Jun 2026

ERICKHILL RT-100 is a handheld EMF meter used to measure electric and magnetic fields. Note that this specific model is designed for low-frequency

The ambient radiation exceeds the device's reading limits. Step back from the source immediately. The alarm sounds constantly in an empty room

appliances and wiring; it cannot measure high-frequency RF signals like Wi-Fi or mobile phone strength. Quick Start Guide Power On/Off : Short press the Power/Hold button to turn on. Long press it to turn off. Taking a Measurement

The ERICKHILL RT-100 is a handheld digital EMF meter designed to detect and measure and magnetic fields (in μT or mG) . Multiple professional reviews have consistently praised the RT-100 for providing reliable basic detection at an unbeatable price point. It is a compact, lightweight device weighing only about 122 grams, measuring approximately 13.4 cm in length, 6 cm in width, and 2.5 cm in thickness—roughly the size of a large candy bar. erickhill rt-100 user manual

Ensure the device is not too far away, as EMF drops rapidly with distance.

+-----------------------+ | LCD Screen | +-----------------------+ | [V/m] [μT/mG]| +-----------------------+ | [V/G] [POWER] [HOLD]| +-----------------------+ 1. Power Button (Center) Press once. The device will beep and initialize. Turn Off: Press and hold for 2 seconds.

: Hold the device and slowly approach the radiation source (e.g., microwave, TV, or computer) with the top sensing area. Note : Avoid covering the top sensors with your hands, as this can interfere with the readings. ERICKHILL RT-100 is a handheld EMF meter used

For further assistance, you can view the full Erickhill RT-100 User Manual on Device Report or Manuals+ . Erickhill RT-100S EMF Meter User Manual - device.report

If you encounter any issues with your ErickHill RT-100, refer to the troubleshooting section in the user manual. Common issues and their solutions include:

The full LCD panel lights up briefly, initializes, and enters the active dual-measurement mode automatically. It displays and Magnetic Field ( T or mG) simultaneously on a split layout. 2. Performing a Sweep The alarm sounds constantly in an empty room

Short-press the power button during a measurement to "lock" the current reading on the screen. Press it again to unlock. Switching Modes:

: Do not hold the meter in your hand or touch it with metal while taking measurements. Doing so can ground the device through your body and cause distorted high readings Distance Matters

The device charges via a standard micro-USB or Type-C accessory port (depending on production batch variations). If the battery indicator icon flashes or the LCD display dims significantly, plug the unit into a 5V/1A wall adapter. Erroneous "0" Readings

uses a combination of lights to show the status of the Hot, Neutral, and Ground wires.