This article was last updated in June 2026. Always refer to the official Autocom and Delphi websites for the latest information on products, licensing and support.
Because the software is abandonware (no longer sold or supported by the original vendor), it is widely shared on:
Let’s clear this up immediately. was originally a Swedish company. Delphi acquired them. Later, Phoenix Mecano (now DrewTech ) bought the division. Consequently, software versions vary wildly:
After installation, launch the software, go to , and run the hardware test. The software should detect your VCI and display a successful connection. If the test fails, re‑check that the correct driver type was selected during installation. delphi autocom software download
Component testing for fuel pumps, cooling fans, and EGR valves.
Delphi Autocom is a diagnostic software suite designed to communicate with a vehicle's On-Board Diagnostics (OBD) system. Unlike basic code readers that only provide generic OBD2 data, Delphi Autocom offers . This means you can access specific modules like ABS, Airbags, Transmission, and Climate Control for thousands of vehicle models from Europe, Asia, and the US. Key Features of Delphi Autocom
This guide covers everything you need to know about downloading, installing, and utilizing the latest versions of Delphi/Autocom software. What is Delphi Autocom Software? This article was last updated in June 2026
Ensure the vehicle ignition is turned ON. The diagnostic box requires power from the car to communicate with the PC. Check Device Manager to ensure the COM port driver is correctly installed. Error: "Operation Failed" during firmware update
This guide assumes you have obtained a legitimate backup of the software or are working with a hardware clone for educational purposes.
As of 2026, patched versions such as 2020.23 and 2021.11 are widely used, offering support for vehicles up to their respective production years [AliExpress]. Does the software work with Windows 10/11? was originally a Swedish company
Connect your DS150E hardware via USB to the PC, open the software, and select "Firmware Update" to match the software version. Frequently Asked Questions (FAQ) What is the latest version of Delphi Autocom software?
Before you hit that download button, here is everything you need to know to avoid bricking your laptop or your vehicle's ECU.
Extract the downloaded archive folder using a utility like WinRAR or 7-Zip. Step 3: Run the Setup Wizard
Most versions require a FileActivation.xml file. You will need to export this file and, depending on your source, use an activator tool or send it to the provider to receive an activated version.