Canon Mb2140 Service Tool 2021 Jun 2026

Beyond what the standard driver allows.

A: Most service tools are Windows-only. You may need a Windows virtual machine, Boot Camp, or a separate Windows PC.

Right-click the Service Tool executable and select .

“It’s not even half full,” Leo muttered, tapping the service manual on his tablet. He’d already disassembled the printer twice, cleaned the sponges himself, and reset the counter using every free script he could find. Nothing worked. The machine was holding his work hostage. canon mb2140 service tool 2021

“Remote diagnostic relay – last sync: 2021-03-17”

Optional: Click at the top to print a diagnostic page confirming the counter reads D=000.0 (which means 0% full). Troubleshooting Common Errors Error Code 006

The is a specialized utility used primarily to resolve the 5B00 error code , which indicates that the printer’s ink absorber (waste ink pad) is full . While Canon does not officially release this tool to the public, various versions like V5105 and V6300 are commonly used by technicians to reset the internal counter and restore printer functionality. Understanding Error 5B00 on MB2140 Beyond what the standard driver allows

To resolve this without hardware replacement, a "Service Tool" is required to reset the counter to zero.

Disclaimer: Using third-party service tools can sometimes permanently damage the printer's firmware. Proceed with caution.

This is not a driver or a firmware update. It is a maintenance utility. The "2021" designation typically indicates a version of the tool (e.g., v4720, v3400) that was confirmed to work with the MB2140’s firmware up to the year 2021. Right-click the Service Tool executable and select

This is not a user-friendly tool for beginners. It requires putting the printer into "Service Mode" (a specific button sequence), which can be tricky.

Clears the "Ink Absorber Full" error by resetting the EEPROM counter to 0%. EEPROM Information:

| Error Code | Meaning | Action Required | | :--- | :--- | :--- | | | Waste ink absorber is full (hard lock) | Waste ink counter reset is mandatory | | Error Code: 1700 | Waste ink absorber is nearly full (warning) | Reset recommended to prevent interruption | | 5B01 / 5B02 / 5B12 / 5B13 etc. | Specific overflow errors for different sections | Waste ink counter reset required | | P07 / 1702 / 1703 / 1704 etc. | Absorber saturation warnings | Reset the waste ink counter |

Connect the printer directly to your Windows computer using a . (Service Mode operations do not work over Wi-Fi).

If a generic Service Tool were to successfully connect to an MB2140, the intended functions would include: