This guide is an independent, user-friendly interpretation of the official Airbot Hypersonic Pro manual. For warranty claims or safety certifications, always refer to the printed documentation included with your device.

Use the provided screws and anchors to secure the mount to the wall.

Look for the "Brush Tangled" or "Airway Blocked" icons if the machine stops unexpectedly. Operating Modes

Hook the vacuum into the mount. Connect the charging cord directly to the charging port on the vacuum handle or through the integrated mount channel. 3. Operating Instructions & Smart Screen Guide

The manual dedicates a full page to explaining when to use each mode. Misusing Boost will drain your battery in 10 minutes.

If used on Turbo mode continuously, the motor may shut down to prevent overheating. Allow the unit to cool down for 30–45 minutes. Loss of Suction Power

According to the manual's "Power Efficiency" chapter, Leo had exactly 45 minutes of runtime in Eco mode. He worked with surgical precision, swapping the wind tube for the handheld mode to reach the crevices of his grandfather’s old oak desk.

Check for wrapped hair or debris around the roller brush. Conclusion

. Ensure they are completely dry (at least 24 hours) before reinserting into the vacuum.

The Hypersonic Pro uses a multi-stage HEPA system. Twist the top of the dust cup to remove the HEPA filter. Pull out the stainless steel pre-filter. Wash both under cold water.

: Check for blockages in the wind pipe or floor brush. Clean the HEPA filter and ensure the dust cup is properly sealed. Error Codes

The is a cordless stick vacuum featuring a smart LED touchscreen and a powerful 27,000Pa suction motor.

Before your first use, follow these steps to set up your Airbot Hypersonic Pro:

AIRBOT Cordless Vacuum Cleaner, 3-in-1 Handheld ... - Amazon.de

By following the guidelines and instructions in this manual, you'll be able to enjoy clean, fresh air and optimal performance from your Airbot Hypersonic Pro. Happy using!