Caraflo V200 Shower Instructions [updated] -

The water stopped being a stream and became a rhythmic, staccato drumming that matched the tempo of his own heartbeat—which was now racing from frustration. A robotic voice said, "Detecting elevated cortisol. Switching to 'Precipice' protocol."

Features 45mm fixing centers , making it a drop-in replacement for older V100 models without needing modifications to the pipework.

Secure the mounting plate or elbows to the wall using the provided wall plugs and screws.

✅ Always turn flow before switching diverter to prevent wear on internal seals. caraflo v200 shower instructions

is designed to replace the older V100 model without needing modifications The Caravan Warehouse Orientation : It can be installed in either a horizontal or vertical Pipe Centers : It features standard 45mm pipe centers Water Connections : Connect the water supply to the inlet marked "H" (or red label) and the supply to the "C" inlet (or blue label). Preparation

: Always ensure the tap is fully drained during the winter period to avoid invalidating warranties or causing leaks. Maintenance & Troubleshooting Caraflo V200 Shower Mixer Tap Thermostatic Chrome

The hot water supply must connect strictly to the inlet marked HOT (H) , and the cold water supply must connect to the inlet marked COLD (C) . Step 2: Mounting the Valve Body Caraflo V200 The water stopped being a stream and became

Tighten the compression nuts firmly using an adjustable spanner. Avoid overtightening, as this can crack plastic caravan pipe fittings or distort internal rubber seals. Step 4: Mount the Shower Valve Body

Next, Sarah adjusted the temperature to her liking. She turned the handle slightly to the left, and the water temperature increased to a comfortable warmth. She was impressed by how smoothly the temperature adjusted, without any sudden spikes or drops.

Before beginning installation, ensure your water system matches the operational parameters of the valve. 0.5 bar Maximum Operating Pressure: 5.0 bar Recommended Pressure: 1.0 to 3.0 bar Hot Water Supply Temperature: 55°C to 65°C Cold Water Supply Temperature: 5°C to 25°C Secure the mounting plate or elbows to the

For a detailed visual guide on the plumbing connections, you can refer to the Caraflo Product Support page.

Connect the cold water line to the right-side inlet (usually marked with blue).

Note : The recommended usage pattern for caravans is: “wet all over, turn off while soaping, then turn back on to rinse”. When you turn the flow back on, you may get a short burst of cold water before the thermostatic valve recovers to your set temperature. This is normal for thermostatic mixers and usually lasts only a few seconds.